Connect to Wireless Networks From the Command Line

We are always on the lookout for geeky ways to impress our friends, and recently we came across a way to connect to our wireless network from the command prompt, so today we’ll show you how to do it as well.

How to Browse and Connect to Wireless Networks From the Command Line

Browsing available wireless networks from the command prompt requires only a single command:

netsh wlan show networks

Unfortunately in order to connect to a network, you need to have a network profile for it. This means that you need to have connected to it at least once before. To see what profiles you have available on your machine, use the following command:

netsh wlan show profiles

Once you have made sure you have a profile for the network you want to connect to, you can easily connect to it using the network profile name:

netsh wlan connect name=”w1r3l3$$”

That’s all there is to it.

Comments

How To Recover Passwords Using Ophcrack LiveCD

Ophcrack LiveCD 3.4.0 is a completely self contained, bootable version of Ophcrack 3.4.0 - the easiest and most effective tool that I've ever found to "crack" your forgotten Windows password. For a quick overview of Ophcrack, see my complete review of Ophcrack 3.4.0 . Ophcrack is a free software program that recovers passwords so the first step you'll need to take is to visit Ophcrack's website . When the Ophcrack website loads as shown above, click the Download ophcrack LiveCD button. Note: Since you obviously can't get into your computer right now because you don't know the password, these first four steps will need to be completed on another computer that you have access to. This other computer will need to have access to the Internet and the capability to burn a disc (like a CD, DVD, etc.). Another Note: The instructions I've put together here walk you through the entire process of using Ophcrack LiveCD to recover your password. If you...

Configuring the Linksys WRT54GS Router for wifi

Basic ADSL Router setup The full GUI can be accessed at http://ui.linksys.com/WRT54G/v1-v4/4.20.7/index.htm location The router will work out of the box, but has none of the security functions enabled as standard. It should be connected by Cat5 or 5e ethernet cable between a modem and the computer network as its job is to manage traffic and protect the network with its built-in firewall. Configuring the WRT54GS is quite straightforward thanks to its user-friendly web interface. To access it enter; http://192.168.1.1 into your web browser. You will be prompted to enter a username and password. Enter admin for both, you will be changing this later. Router Name This image above is of the first web interface showing the basic configuration settings. Nothing needs to be changed here for most home user setups, but I suggest changing the Router Name to something meaningful and changing the Time Zone. If you have made any changes, click Save at t...

How To Setup a USB Flash Drive to Install Windows 7

If you have an ISO image of Windows 7, using Microsoft’s free utility is a quick and easy option to get the image on your USB flash drive. It requires XP SP2 or higher and if you’re using an XP machine you’ll need .NET Framework 2.0, and Microsoft Image Mastering API V2…both of which can be downloaded from the link below. It seemed to work best if I formatted the flash drive as NTFS before using the download tool. But that could be because of the flash drive I used…your mileage may vary. It’s a pretty straight forward process, first browse to the location of your Windows 7 ISO file and click Next. Select USB device…this also helps you burn the ISO to DVD as well if you need that option. Choose your flash drive and click Begin copying. Now just wait for the process to complete. The drive will be formatted and files copied to the flash drive. When the process is finished you will be able to see the files on the flash drive as you would if you opened the installat...

Priyam Vaidya's Blog

Search This Blog