Skip to main content

RAID (Redundant Array Of Independent Disks)


RAID (redundant array of independent disks; originally redundant array of inexpensive disks) is a way of storing the same data in different places (thus, redundantly) on multiple hard disks. By placing data on multiple disks, I/O (input/output) operations can overlap in a balanced way, improving performance. Since multiple disks increases the mean time between failures (MTBF), storing data redundantly also increases fault tolerance.

RAID appears to the operating system to be a single logical hard disk. RAID employs the technique of disk striping, which involves partitioning each drive's storage space into units ranging from a sector (512 bytes) up to several megabytes. The stripes of all the disks are interleaved and addressed in order.
In a single-user system where large records, such as medical or other scientific images, are stored, the stripes are typically set up to be small (perhaps 512 bytes) so that a single record spans all disks and can be accessed quickly by reading all disks at the same time. In a multi-user system, better performance requires establishing a stripe wide enough to hold the typical or maximum size record. This allows overlapped disk I/O across drives.
There are at least nine types of RAID plus a non-redundant array (RAID-0):
  • RAID-0: This technique has striping but no redundancy of data. It offers the best performance but no fault-tolerance.
  • RAID-1: This type is also known as disk mirroring and consists of at least two drives that duplicate the storage of data. There is no striping. Read performance is improved since either disk can be read at the same time. Write performance is the same as for single disk storage. RAID-1 provides the best performance and the best fault-tolerance in a multi-user system.
  • RAID-2: This type uses striping across disks with some disks storing error checking and correcting (ECC) information. It has no advantage over RAID-3.
  • RAID-3: This type uses striping and dedicates one drive to storing parity information. The embedded error checking (ECC) information is used to detect errors. Data recovery is accomplished by calculating the exclusive OR (XOR) of the information recorded on the other drives. Since an I/O operation addresses all drives at the same time, RAID-3 cannot overlap I/O. For this reason, RAID-3 is best for single-user systems with long record applications.
  • RAID-4: This type uses large stripes, which means you can read records from any single drive. This allows you to take advantage of overlapped I/O for read operations. Since all write operations have to update the parity drive, no I/O overlapping is possible. RAID-4 offers no advantage over RAID-5.
  • RAID-5: This type includes a rotating parity array, thus addressing the write limitation in RAID-4. Thus, all read and write operations can be overlapped. RAID-5 stores parity information but not redundant data (but parity information can be used to reconstruct data). RAID-5 requires at least three and usually five disks for the array. It's best for multi-user systems in which performance is not critical or which do few write operations.
  • RAID-6: This type is similar to RAID-5 but includes a second parity scheme that is distributed across different drives and thus offers extremely high fault- and drive-failure tolerance.
  • RAID-7: This type includes a real-time embedded operating system as a controller, caching via a high-speed bus, and other characteristics of a stand-alone computer. One vendor offers this system.
  • RAID-10: Combining RAID-0 and RAID-1 is often referred to as RAID-10, which offers higher performance than RAID-1 but at much higher cost. There are two subtypes: In RAID-0+1, data is organized as stripes across multiple disks, and then the striped disk sets are mirrored. In RAID-1+0, the data is mirrored and the mirrors are striped.
  • RAID-50 (or RAID-5+0): This type consists of a series of RAID-5 groups and striped in RAID-0 fashion to improve RAID-5 performance without reducing data protection.
  • RAID-53 (or RAID-5+3): This type uses striping (in RAID-0 style) for RAID-3's virtual disk blocks. This offers higher performance than RAID-3 but at much higher cost.
  • RAID-S (also known as Parity RAID): This is an alternate, proprietary method for striped parity RAID from EMC Symmetrix that is no longer in use on current equipment. It appears to be similar to RAID-5 with some performance enhancements as well as the enhancements that come from having a high-speed disk cache on the disk array.
Labels:

Comments

Post a Comment

Popular posts from this blog

Session Messenger----Best Secure Messaging App

  Session is fundamentally different than most other secure messaging services. Conversations in Session are secured using  client-side E2E encryption . Only the sender and the recipient of a message can read it. But Session goes beyond providing message security. Session also  protects the identities  of its users. It makes your communications private and anonymous, as well as secure. Session can do this because it  connects users  through a  Tor -like network of thousands of  Service Nodes . Service Nodes are servers that pass messages back and forth through the network as well as provide additional services. The  onion request  system that Session uses to protect messages ensures that no Service Node in the network ever knows both a message’s origin (your IP address) and destination (the recipient’s IP address). This allows you to  hide your IP  by default. Session takes a number of additional steps to protect your identity: No phone number is required for registration No email is r
Post a Comment
Read more

Tiny 11 - A Lightweight Windows 11 that can run on 2GB RAM and requires less harddisk space.

  In terms of Windows 11, its   system requirements   are high since this system requires at least 4GB RAM, 64GB storage space, enabled TPM & Secure Boot, a high CPU (1 GHz or faster with 2 or more cores on a compatible 64-bit processor), etc. compared to any old Windows operating systems. If you have an old or lower-end PC, Windows 11 is not a good option to install since many issues like random crashes, blue screen errors, etc. could appear on the unsupported hardware. Overview of Tiny11 If you want to run Windows 11 on your old computer with low RAM and disk space, Tiny11 appears in public. It is a project from NTDev and Tiny11 is a Windows 11 tiny edition. This edition is based on Windows 11 Pro 22H2 and includes everything you need for a comfortable computing experience since this tool doesn’t have the bloat and clutter of a standard Windows installation. Tiny11 Requirements In terms of Tiny11 requirements, a scant 8GB of storage and just 2GB of RAM are required and Windows 11
Post a Comment
Read more

Linuxfx 10 : A Windows-Like Linux Distro

The idea of Linuxfx is to make it easier for people who are migrating from Windows 7. People who are dissatisfied with the lack of security and stability of Windows 10 are also fit for Linuxfx. LinuxFX Desktop : Apart from Windows-like looks, Linuxfx also has more to offer which a regular user will definitely admire. So, let’s get along with me to know more about Windows alternative Linuxfx. As usual, I started by downloading the ISO image of Linuxfx from the official site  here . Then, instead of dual-booting, I decided to install it on my VirtualBox to play safely. After finishing the basic configuration, as soon as I booted it, I noticed a Windows logo and system integrity check. That’s quite surprising because every Linux distro puts their own or OEM logo on that place. But I think Linuxfx wants to make migrating users feel like home from the beginning. Entering the boot menu, Linuxfx redirected and logged in to a live session. Whoah! it can also detect the system I’m using — anoth
Post a Comment
Read more