Skip to main content

Create a System Repair Disc in Windows 7

Create System Repair Disc
Type system repair disc into the search box in the Start menu.
1-sysp
The dialog box opens where you select the right drive and click Create disc. A CD will be fine as it only takes up 142MB of space.
 
Using the Disc
If you are having problems with your machine just pop in the recovery disc and boot from it and enter into Windows Setup [EMS Enabled].

After it boots up you can access recovery tools or restore the computer back to a system image 

Now you can choose from different recovery options to help you get your machine back up and running.

You never know when an Operating System disaster might occur, but having a System Recovery Disc to boot from should be part of your backup and recovery toolbox in case it does.
Labels:

Comments

Post a Comment

Popular posts from this blog

Creating NLB Cluster Windows 2008 Server

Creating an NLB Cluster There are three key steps to creating an NLB cluster in Windows Server 2008: Install the NLB Feature into Server 2008 on each host that you will add to an NLB cluster. Use the New Cluster wizard to create the cluster and add the first host. Use the Add Host wizard to add one ore more nodes to your cluster Installing NLB in Server 2008 This is extremely easy. First you run Server Manager, and select Features from the tree and click on Add Features: From the Add Features wizard just select Network Load Balancing and click Next: Finally from the Confirm Installation Selections click Install: After a few seconds, NLB will be installed on the first host. You need to repeat this installation on each host you plan to add to your NLB Cluster. Installing the NLB feature does NOT require a reboot, but removing it does. Creating your NLB Cluster Once NLB is installed, you create your cluster by first bringing up the NLB Cluster Manager: The right c...
1 comment
Read more

How to Create a MultiBoot USB Flash Drive for Windows and Linux

Step 1) Download an .ISO version of your installation (available through various sources [Microsoft, Apple, etc., or just from within the tool itself.]) Step 2) Plug in your USB and open up " My Computer ". Right click the USB, and select the " Format " button.    Note Recommended options: FAT32, quick format.       Now, continue at the warning prompt. And then press 'Ok' Step 3) Once the format is complete, open up this tool called ' YUMI ' YUMI - Multiboot USB Creator (Windows) | USB Pen Drive Linux Step 4) Using ' YUMI ', select the drive letter of your USB    Tip Make sure you chose the correct USB by opening up 'My Computer' and reading the Drive Letter) Step 5) There is a large list of possible operating systems, along with a built in DOWNLOAD feature! Select the operating system you want to download, and then browse for your .ISO file. Step 6) Press "Create" ...
1 comment
Read more

How To Setup a USB Flash Drive to Install Windows 7

If you have an ISO image of Windows 7, using Microsoft’s free utility is a quick and easy option to get the image on your USB flash drive. It requires XP SP2 or higher and if you’re using an XP machine you’ll need .NET Framework 2.0, and Microsoft Image Mastering API V2…both of which can be downloaded from the link below. It seemed to work best if I formatted the flash drive as NTFS before using the download tool. But that could be because of the flash drive I used…your mileage may vary.   It’s a pretty straight forward process, first browse to the location of your Windows 7 ISO file and click Next. Select USB device…this also helps you burn the ISO to DVD as well if you need that option. Choose your flash drive and click Begin copying. Now just wait for the process to complete. The drive will be formatted and files copied to the flash drive. When the process is finished you will be able to see the files on the flash drive as you would if you opened the installat...
1 comment
Read more